top of page

Pesticide Residue Testing for Bulk Herbs: An EU Buyer Scope Checklist

Nov 12
5 min read

A pesticide residue report is useful only when its scope matches the product, market and lot. A long analyte list does not establish EU compliance. Buyers need the commodity and residue definitions, suitable method limits, and evidence that the sample represents the commercial lot.

For an EU destination, Regulation (EC) No 396/2005 is the legal framework for maximum residue levels in or on food and feed of plant and animal origin. The European Commission's EU Pesticides Database is a practical research tool, but the Commission states that the database is informational and that official information is published in the Official Journal. No current MRL number is stated here because the applicable value depends on the exact commodity, pesticide residue definition and decision date.

What a residue testing scope means

A residue testing scope is the controlled description of what will be sampled, measured, reported and compared with which requirements. It should identify the bulk herb, physical form, intended destination, applicable commodity classification, analyte or residue definitions, method, reporting limits, laboratory scope, lot identity and decision rule. It is not the same as a generic certificate of analysis, and it cannot compensate for an incorrectly classified product or an unrepresentative sample.

A buyer scope workflow

1. Fix the commercial product identity

Start with the botanical and common name, plant part, whole or cut form, and any relevant processing description. Record the supplier's product code and the buyer's specification name. Similar commercial names can map differently in legal commodity classifications. Do not assume that oregano, thyme, mixed herbs or a ground blend share one MRL entry. Resolve uncertainty before choosing the panel or interpreting a result.

2. Confirm destination and intended placing on the market

State the EU destination and any further national, customer or contractual requirements. The legal assessment should match the market in which the product will be placed and its intended use. A report prepared for a different country, commodity or earlier shipment may be background evidence, but it is not automatically the decision basis for the current lot.

3. Research the current EU commodity and residue definitions

On the decision date, check Regulation (EC) No 396/2005 and the EU Pesticides Database for the exact commodity and substance. Record the search date, commodity code or description, pesticide residue definition and source link. The database can show current or historical MRL information, but its own disclaimer says it has no legal value. When a decision depends on the legal text, confirm the relevant Official Journal measure and consolidated context.

4. Build the analytical scope from risk and requirements

Define the substances and residue definitions the method must address. Use destination requirements, product and origin risk information, agricultural history where available, previous findings and buyer policy. A standard multi-residue screen may not include every relevant compound or metabolite. Ask the laboratory to identify exclusions, single-residue methods and substances for which performance is limited in the herb matrix.

5. Set fit-for-purpose LOQs and reporting rules

LOQ means limit of quantification, the level at which the laboratory reports a quantitative result under its method. Confirm that each relevant LOQ is suitable for the applicable decision point and matrix. A result reported as below LOQ does not mean absolute absence. Specify units, rounding, residue summation where applicable, treatment of qualifiers and how measurement uncertainty will be addressed in the agreed decision process.

6. Define representative sampling and sample custody

The result describes the laboratory sample, not automatically every package in the lot. Commission Directive 2002/63/EC provides methods for official-control sampling and requires a traceable sampling record. On 18 November 2026 it remains the applicable reference, while Commission Implementing Regulation (EU) 2026/765 applies from 1 January 2027 and then repeals it. For private commercial sampling, document the agreed plan, increments, sample reduction, containers, seals, sampler, date and any departure.

7. Check laboratory accreditation and the specific scope

ISO/IEC 17025:2017 sets requirements for the competence, impartiality and consistent operation of testing and calibration laboratories. Request evidence of current accreditation from a recognised accreditation body and examine the annex or scope, not only the certificate cover. Confirm that the relevant method, matrix or flexible-scope arrangement is covered. Accreditation is not a blanket approval of every test a laboratory offers.

8. Link the report to one defined lot

The sampling record, laboratory submission and report should reconcile the product name, lot code, quantity or packaging population, sampling date and sample seal or identifier. Control any composite sample carefully. A report from another lot, crop year or processing stage can inform risk assessment, but it should not be represented as the finished-lot result.

9. Predefine the review and decision rule

State who reviews the report, what specification and legal sources are consulted, and which outcomes lead to release, hold, investigation, resampling, rejection or another authorised disposition. Address findings close to a decision point, measurement uncertainty and contradictory results before they occur. Commercial release should remain on hold while a material discrepancy is unresolved.

10. Control changes before repeating the programme

Reassess the scope when the herb, origin, supplier chain, crop, process, intended market, legal requirement, laboratory method or risk information changes. Version the panel and record why analytes were added or removed. A panel suitable last season may be incomplete on a later decision date. Verify current requirements on the decision date rather than treating an old checklist as permanent.

Common pitfalls

  • Ordering a large panel before resolving the EU commodity classification.

  • Copying an MRL from an old report or a different herb.

  • Assuming the database entry alone is the legal text.

  • Treating every analyte in a method list as accredited for the relevant matrix.

  • Accepting an LOQ that cannot support the intended decision.

  • Using a convenient grab sample without a documented lot basis.

  • Reading below LOQ as proof of zero residue.

  • Releasing a lot without reconciling its identity to the report.

  • Keeping the same scope after a legal, origin, process or risk change.

FAQ

Does a broad multi-residue panel prove EU compliance?

No. It is evidence for the substances, residue definitions, matrix and performance covered by the method. Commodity classification, applicable MRLs, sampling, exclusions and lot linkage still require review.

Can the buyer use one MRL value for all dried herbs?

No general value should be assumed. Check Regulation (EC) No 396/2005 and the EU Pesticides Database for the exact commodity and substance on the decision date, then confirm the official legal source where the decision requires it.

Is an ISO/IEC 17025 certificate enough?

No. Review the current accreditation status and detailed scope. The requested method and relevant matrix or flexible-scope rules must be understood.

Does a compliant supplier sample release the whole lot?

Only if the sample is demonstrably linked to the defined lot under an agreed sampling and decision plan. The report cannot repair weak sample representativeness.

External sources

  • Regulation (EC) No 396/2005 on maximum residue levels of pesticides: https://eur-lex.europa.eu/eli/reg/2005/396/oj/eng

  • European Commission, EU Pesticides Database: https://food.ec.europa.eu/plants/pesticides/eu-pesticides-database_en

  • Commission Directive 2002/63/EC on official-control sampling methods, applicable until the 2027 transition: https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32002L0063

  • Commission Implementing Regulation (EU) 2026/765, applicable from 1 January 2027: https://eur-lex.europa.eu/eli/reg_impl/2026/765/oj/eng

  • Regulation (EU) 2017/625 on official controls: https://eur-lex.europa.eu/eli/reg/2017/625/oj/eng

  • ISO/IEC 17025:2017 official catalogue: https://www.iso.org/standard/66912.html

Sources were accessed on 18 November 2026. Verify the current consolidated law, exact commodity and substance, laboratory scope, destination requirements and customer specification on the decision date.

A restrained next step

Before requesting a quotation or pre-shipment test, issue a one-page scope sheet that names the exact herb, EU destination, decision-date sources, analytes, LOQs, sampling plan, laboratory-scope requirement, lot identifiers and disposition rule.

 
 
Tuna-spice-favicon

TUNA PROJECT GLOBAL TRADE INC.

TUNA PROJECT GLOBAL TRADE INC.

TUNA PROJECT LLC

HEADQUARTER

BRANCH - FACILITY

BRANCH - WAREHOUSE

Address: Fuat Edip Baksı Mah. Anadolu Cad. 175/1 D:13, Bayrakli 35540 Izmir Turkey

Phone: +90 532 518 32 88

Email:  info@tunaspice.com

Address: Gazi Mustafa Kemal Paşa Mah. Fatih Caddesi No:89/A Torbalı 35860 Izmir Turkey

Phone: +90 850 532 32 44   Email:  order@tunaspice.com

​

Address: 7901 4 TH St. N#16745 St Petersburg FL 33702 USA

Phone: +1 908 444 6 888     

Email: office@tunaspice.com

SUBSCRIBE

Thank you for your subscription.

Tuna Project Global Trade Inc. is Alibaba Gold Supplier
Wechat-Tunaproject-Orange
  • Linkedin
  • Facebook
  • Instagram
  • Whatsapp

© 2025 TunaSpice.com by Tuna Project

bottom of page